Maretron Pressure Transducer 0-50 PSI

£150.00

Accessory for the FMP100

Out of stock

SKU: 468-PT-0-5PSI-01 Category: Tag:

Description

All Maretron pressure transducer assemblies are equipped with a ¼” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 133 to 177 in-lbs (15 to 20 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.

Additional information

Weight 0.2 kg
Dimensions 23 × 23 × 5 cm

Reviews

There are no reviews yet.

Be the first to review “Maretron Pressure Transducer 0-50 PSI”

Your email address will not be published. Required fields are marked *