Maretron Submersible Pressure Transducer 0 to 1.5 PSI

£246.00

Submersible Pressure Transducer – 0 to 1.5 PSI.

Out of stock

SKU: 468-PTS015PSI0 Category: Tag:

Description

Maretron Fluid Pressure Sensor Transducers work with the Maretron FMP100 which will adapt up to six pressure transducers to the NMEA 2000 network.

Submersible Pressure Transducer – 0 to 1.5 PSI.

Used for tanks up to 40″ or 1M in depth.

The submersible pressure transducers are used together with Maretron’s Fluid Pressure Monitor (FPM100), whichallows tank fluid level to be broadcast over an NMEA 2000® network where it can be monitored from any compatible NMEA 2000® display. When used together with Maretron displays, alerts can be set so the user can be informed of low or high tank levels. And when not on-board the vessel, users can be notified through emails or text messages about theirtank levels. Additionally, the tank levels can be stored using Maretron’s data recorder (VDR100) for later analysis.

Maretron pressure transducers are not approved for use with gasoline. If you wish to use the FPM100 to monitor pressures or levels of gasoline, you must obtain a pressure transducer that is approved for use with gasoline.

Additional information

Weight 0.41 kg
Dimensions 41 × 30 × 5 cm

Reviews

There are no reviews yet.

Be the first to review “Maretron Submersible Pressure Transducer 0 to 1.5 PSI”

Your email address will not be published. Required fields are marked *

You may also like…