Victron Skylla-TG 24/50 GMDSS 120/240V Battery charger

£1,532.40

Features include: Temperature sensor, use as a power supply, forced cooling.

Input voltage / input voltage range: 230 V AC / 90 – 265 V AC.

Frequency: 45-65 Hz / Power factor: 1.

Charge voltage ‘absorption’ / ‘float’: 28.5 V DC / 26.5 V DC.

Charge current: 50 A.

Charge characteristic: IUoUo (three step).

Protection: output short circuit, battery reverse polarity detection, battery voltage too high, temperature too high.

Operating temp. range -20 to 60°C (0 – 140°F).

Humidity (non condensing) max 95%.

Protection category IP 21.

Out of stock

SKU: 792-SDTG2400504 Category: Tag:

Description

The Skylla TG has proven itself to be an excellent battery charger and power supply for GMDSS applications. However, when using a standard Skylla charger, additional equipment is needed to perform the monitoring and alarm functions required for GMDSS.

Installation made easy: the Skylla GMDSS – The Victron Skylla GMDSS charger has been designed to provide all required monitoring and alarm data. Both the battery and the GMDSS system are connected directly to the charger. Data and alarms are displayed on a digital panel (VE.Net GMDSS panel, to be ordered separately). A standard eight wire UTP cable connects the charger to the panel.

No adjustments needed – The whole system is ‘click and go’: the panels are pre-programmed for GMDSS functionality. A simple, intuitive menu allows changing of settings if required.

Battery time to go – The Skylla GMDSS charger has a built-in battery controller. The capacity of the battery is fully monitored so the panel can even indicate the ’time to go’ in case of a power supply black out.

Perfect charger for any type of battery – Charge voltage can be precisely adjusted to suit any VRLA or flooded battery system.

Additional information

Weight 8.65 kg
Dimensions 56 × 33 × 23 cm

Reviews

There are no reviews yet.

Be the first to review “Victron Skylla-TG 24/50 GMDSS 120/240V Battery charger”

Your email address will not be published. Required fields are marked *