Victron Orion 12/12-9A 110w DC-DC

£74.40

Input voltage range: 8-17 V.

Under voltage shut down / restart: 7 V / 7,5 V.

Nominal output voltage: 12,2 V.

Output voltage adjust range: 10-15 V.

Output voltage tolerance: +/- 0,2 V.

Output noise: 2 mV rms.

Cont. output current at nominal output voltage and 25°C: 9 A.

Maximum output current (10 s) at nominal output voltage: 12,5 A.

Short circuit output current: 32 A.

Cont. output power at 25°C / 40°C: 110 W / 85 W.

Out of stock

SKU: 792-ORI121210110 Category: Tag:

Description

Orion-Tr DC-DC converters isolated: 100 Watt series.

Remote on-off – The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

Adjustable output voltage: can also be used as a battery charger – For example to charge a 12 Volt starter or accessory battery in an otherwise 24 V system.

All models are short circuit proof and can be paralleled to increase output current – An unlimited number of units can be connected in parallel.

IP43 protection – When installed with the screw terminals oriented downwards.

Screw terminals – No special tools needed for installation.

Input fuse – On 12V and 24V input models only.

Galvanic isolation: 200 V dc between input, output and case.

Operating temperature range: -20 to +55°C (derate 3% per °C above 40°C).

Humidity: Max. 95% non condensing.

DC connection: Screw terminals.

Maximum cable cross-section: 6 mm² AWG10.

Dimensions (HxWxD) / Weight: 100 x 113 x 47 mm / 0.42 kg.

Standards:.

Safety: EN 60950.

Emission: EN 61000-6-3, EN 55014-1.

Immunity: EN 61000-6-2, EN 61000-6-1, EN 55014-2.

Automotive Directive: EN 50498.

Additional information

Weight 0.5 kg
Dimensions 14 × 12 × 6 cm

Reviews

There are no reviews yet.

Be the first to review “Victron Orion 12/12-9A 110w DC-DC”

Your email address will not be published. Required fields are marked *