Victron Orion-Tr DC-DC Converter-Isolated 12/12-18A (220W)

£134.40

Input voltage range: 8-17 V.

Under voltage shut down / restart: 7V / 7.5 V.

Nominal output voltage: 12,2 V.

Output voltage adjust range: 10-15 V.

Output voltage tolerance: +/- 0,2 V.

Output noise: 2 mV rms.

Cont. output current at nominal output voltage and 40°C: 18 A.

Maximum output current (10 s) at nominal output voltage: 25 A.

Short circuit output current: 40 A.

Cont. output power at 25°C / 40°C: 280 W / 220 W.

Out of stock

SKU: 792-ORI121222110 Category: Tag:

Description

Orion-Tr DC-DC converters isolated: 100 Watt series.

Remote on-off – The remote on-off eliminates the need for a high current switch in the input wiring. The remote on-off can be operated with a low power switch or by for example the engine run/stop switch (see manual).

Adjustable output voltage: can also be used as a battery charger – For example to charge a 12 Volt starter or accessory battery in an otherwise 24 V system.

All models are short circuit proof and can be paralleled to increase output current – An unlimited number of units can be connected in parallel.

IP43 protection – When installed with the screw terminals oriented downwards.

Screw terminals – No special tools needed for installation.

Input fuse – On 12V and 24V input models only.

Galvanic isolation: 200 V dc between input, output and case.

Operating temperature range: -20 to +55°C (derate 3% per °C above 40°C).

Humidity: Max. 95% non condensing.

DC connection: Screw terminals.

Maximum cable cross-section: 13 mm² AWG6.

Dimensions (HxWxD) / Weight: 130 x 186 x 70 mm / 1.3 kg.

Standards:.

Safety: EN 60950.

Emission: EN 61000-6-3, EN 55014-1.

Immunity: EN 61000-6-2, EN 61000-6-1, EN 55014-2.

Automotive Directive: EN 50498.

Additional information

Weight 1.28 kg
Dimensions 20.5 × 13 × 9 cm

Reviews

There are no reviews yet.

Be the first to review “Victron Orion-Tr DC-DC Converter-Isolated 12/12-18A (220W)”

Your email address will not be published. Required fields are marked *